NOVOTEST T-D3 – professional Leeb hardness tester
Applications
For inspection companies and manufacturers of large structures that need Leeb measurements with documentation, statistics and different probes (D, DC, DL, C, G, D+15, E) for various geometries and weights.
Key features
- Large colour display, modes: statistics, graph, histogram, Smart, Signal
- 88 material and scale combinations, 8 pre-calibrated materials
- Photo documentation, memory up to 32 GB, USB export
- Probes D (standard), DC, DL, C, G, D+15, E; DC-R, DC-R-mini options
- Waterproof housing with rubber bumper, wireless printer (option)
Models
T-D3; T-D3 (Lab)
Technical data
- Range (steel): HRC 20–70; HB 90–650; HV 230–940; Rm 370–1740 MPa
- Recommended part: >5 kg and >10 mm; surface Ra 3.2 and rougher
- Display: colour LCD 320 × 240; operating temperature -20…+40 °C
- Power supply: 3 × AA, ~10 h
- Dimensions / weight: 160 × 75 × 30 mm / ~0.3 kg (without probe)
Standards
ASTM A956, ASTM E140, ASTM A370, ISO 16859, DIN 50156, GB/T 17394, JB/T 9378, ISO 18265
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: novotest.biz
You might also be interested in
Foerster SONODUR 3 – portable UCI and Leeb hardness tester
Rugged portable hardness tester for the UCI and Leeb methods – for welds, heat-treated parts and parts that are difficult to access.
Foerster SONODUR 3 LITE LEEB – portable Leeb hardness tester
Simplified version of the SONODUR 3 for Leeb hardness measurements only – the same probes and the same accuracy.
Foerster SONO probes and stands – UCI and Leeb probes for SONODUR instruments
Manual, motorised and guided UCI probes, Bluetooth and cabled Leeb probes, stands and hardness reference blocks.
NOVOTEST T-UD2 – combined UCI + Leeb hardness tester
For companies with very different samples – from massive castings with rough surfaces (Leeb) to thin-walled and small parts, grooves and gear teeth (UCI).
CISAM-Ernst e-computest / Computest-Lite – portable Rockwell hardness tester
For quality control of metal parts directly in production or on site, when large or hard-to-transport products cannot be taken to the laboratory.
NOVOTEST T-U2 – economical UCI hardness tester
For workshops and inspection departments that need an inexpensive portable instrument for small, thin-walled or complex-shaped parts (gears, bearings, welds, nitrided and carburised layers) where the Leeb method is not suitable.
NOVOTEST T-U3 – UCI hardness tester with camera
For inspection services where documentation matters: each measuring point is captured with a photo, and results are exported to a PC.
NOVOTEST T-UD3 – combined UCI + Leeb hardness tester with camera
Versatile portable solution for inspectors and metal warehouses: solid parts, castings and forgings – with the Leeb probe; thin, small, complex-shaped parts and hardened layers – with the UCI probe.
NOVOTEST T-D2 – Leeb hardness tester for heavy parts
For foundries, forges, metal warehouses and assembly sites where heavy (>5 kg, >10 mm) parts are tested with minimal surface preparation. No special skills required.
NOVOTEST T-D2-R – Leeb hardness tester with miniature probe
For inspection in openings, grooves and between structural elements where a standard D probe does not fit. Minimal surface preparation, low sensitivity to grain structure.