NOVOTEST Lab UCI Pro – new-generation wireless UCI hardness tester with display
Applications
For professional laboratory and field testing when both stand-alone operation without a phone and full NOVOTEST Lab analysis are needed. With the protective cap removed, measurements can be taken in holes up to 20 mm deep, between gear teeth and in narrow grooves.
Key features
- Integrated 0.66” display and controls – works without the app
- Range 0–2000 HV, measurement uncertainty 4 %
- Conversions according to ASTM E140 and ISO 18265; HK scale
- 8 material calibrations (steel, alloy steel, stainless steel, cast iron, nickel, aluminium, brass, copper), user-defined materials
- Li-ion 750 mAh, up to 24 h, USB-C charging; 160 g
- Removable indenter cap for hard-to-reach places
Models
Lab UCI Pro HV1 (9.8 N) / HV5 (49 N) / HV10 (100 N) – depending on the instrument type
Technical data
- Scales: HV, HB, HRC, HRB, HRA, HK, MPa
- Range: 0…2000 HV; uncertainty 4 %
- Load: HV1 (9.8 N), HV5 (49 N) or HV10 (100 N)
- Display: 0.66” (64 × 48); interfaces USB-C, Bluetooth BLE
- Battery: Li-ion 3.7 V 750 mAh, up to 24 h
- Operating temperature: -20…+50 °C
- Dimensions / weight: 153 × 40 mm / 160 g
Standards
ASTM A1038, DIN 50159, ASTM E140, ISO 18265
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: novotest.biz, novotest.biz
You might also be interested in
CISAM-Ernst STE/A and STE/B – portable Brinell hardness tester
For standard Brinell hardness (100–700 HB) measurement on site – on small surfaces, in all positions, on parts of any shape and size, including hard-to-reach locations.
Foerster SONODUR 3 – portable UCI and Leeb hardness tester
Rugged portable hardness tester for the UCI and Leeb methods – for welds, heat-treated parts and parts that are difficult to access.
Foerster SONODUR 3 LITE LEEB – portable Leeb hardness tester
Simplified version of the SONODUR 3 for Leeb hardness measurements only – the same probes and the same accuracy.
Foerster SONO probes and stands – UCI and Leeb probes for SONODUR instruments
Manual, motorised and guided UCI probes, Bluetooth and cabled Leeb probes, stands and hardness reference blocks.
NOVOTEST T-UD2 – combined UCI + Leeb hardness tester
For companies with very different samples – from massive castings with rough surfaces (Leeb) to thin-walled and small parts, grooves and gear teeth (UCI).
CISAM-Ernst e-computest / Computest-Lite – portable Rockwell hardness tester
For quality control of metal parts directly in production or on site, when large or hard-to-transport products cannot be taken to the laboratory.
NOVOTEST T-U2 – economical UCI hardness tester
For workshops and inspection departments that need an inexpensive portable instrument for small, thin-walled or complex-shaped parts (gears, bearings, welds, nitrided and carburised layers) where the Leeb method is not suitable.
NOVOTEST T-U3 – UCI hardness tester with camera
For inspection services where documentation matters: each measuring point is captured with a photo, and results are exported to a PC.
NOVOTEST T-UD3 – combined UCI + Leeb hardness tester with camera
Versatile portable solution for inspectors and metal warehouses: solid parts, castings and forgings – with the Leeb probe; thin, small, complex-shaped parts and hardened layers – with the UCI probe.
NOVOTEST T-D2 – Leeb hardness tester for heavy parts
For foundries, forges, metal warehouses and assembly sites where heavy (>5 kg, >10 mm) parts are tested with minimal surface preparation. No special skills required.