Karl Deutsch LEPTOSKOP probes – interchangeable Fe/NFe probes up to 20 mm
Applications
A range of probes for the LEPTOSKOP 2042 gauge that allows a single instrument to measure coatings from a few microns up to 20 mm thick on steel and non-ferrous metals. Angled (45°, 90°) probes and micro probes are designed for the inside of pipes, holes and small parts.
Key features
-
13 standard probes for one instrument
-
Dual Fe/NFe probe automatically recognises the substrate
-
Thick-coating probes up to 20 mm (Fe S) and 12.5 mm (two-pole)
-
Micro probes 0°, 45°, 90° – 0–500 µm
-
90° probes for hard-to-reach areas (inner pipe walls) Models / variants (order no. – probe – range):
-
2442.410 Dual Fe/NFe 0° – 0–3,000 µm Fe / 0–1,250 µm NFe
-
2442.100 Fe 0° – 0–5,000 µm; 2442.110 Fe 90° – 0–5,000 µm
-
2442.120 Fe S 0° – 0.5–20 mm; 2442.200 two-pole Fe – 0.5–12.5 mm
-
2442.130 NFe 0° – 0–1,000 µm; 2442.140 NFe S 0° – 0–3,750 µm
-
2442.300/.320/.340 micro Fe 0°/45°/90° – 0–500 µm
-
2442.310/.330/.350 micro NFe 0°/45°/90° – 0–500 µm
Technical data
- Methods: magnetic induction (Fe), eddy current (NFe)
- Max. coating thickness: up to 20 mm
- Compatibility: LEPTOSKOP 2042
Standards
DIN EN ISO 2178, DIN EN ISO 2360
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: karldeutsch.de
You might also be interested in
Karl Deutsch LEPTOSKOP 2042 – universal coating thickness gauge with interchangeable probes
Industrial handheld gauge that, depending on the probe, measures non-magnetic coatings on steel (magnetic induction) and non-conductive coatings on non-ferrous metals (eddy current).
Helmut Fischer MP0 / MP0R series – compact coating thickness gauges for corrosion protection
Compact series of handheld gauges for measuring the thickness of paint, hot-dip galvanised and plastic coatings on site on most metals.
Helmut Fischer DMP10-40 series – universal coating thickness gauges with interchangeable probes
A universal series of handheld gauges for quality assurance in production and in the laboratory – non-destructive coating thickness measurement on ferrous and non-ferrous metals with a very wide range of probes.
Karl Deutsch LEPTO-Pen 2091 – mechanical coating thickness gauge for steel
A simple and economical instrument for quickly checking the thickness of non-magnetic coatings on unhardened commercial steel when the accuracy of an electronic gauge is not needed.
Karl Deutsch Pocket-LEPTOSKOP – pocket coating thickness gauge
One of the smallest electronic coating thickness gauges with an integrated spring-loaded probe, designed for quick one-handed checks.
Helmut Fischer DUALSCOPE FMP100 and H FMP150 – gauges with inspection plans
Handheld gauges for complex and regulated measuring tasks in production quality control.
Helmut Fischer PHASCOPE PMP10 – metallic coating thickness gauge for special tasks
A classic handheld gauge for quality control of electroplated and metallic coatings where conventional methods do not work: rough surfaces, small and curved parts, conductive coatings on conductive substrates.
Helmut Fischer PHASCOPE PMP10 DUPLEX – duplex coating thickness gauge
A specialised gauge for duplex systems – paint on galvanised steel – from car bodies to roofing and façade sheet.
Helmut Fischer SR-SCOPE DMP30 – copper thickness gauge for PCBs
A handheld instrument for electronics manufacturers for measuring the thickness of thin copper layers on multilayer PCBs and laminates without influence from deeper, insulated copper layers.
Helmut Fischer FISCHERSCOPE MMS PC2 – modular benchtop measuring system
A universal benchtop system for laboratories and production quality control: coating thickness, electrical conductivity and ferrite content are measured in parallel with one instrument.