Karl Deutsch LEPTOSKOP probes – interchangeable Fe/NFe probes up to 20 mm
Applications
A range of probes for the LEPTOSKOP 2042 gauge that allows a single instrument to measure coatings from a few microns up to 20 mm thick on steel and non-ferrous metals. Angled (45°, 90°) probes and micro probes are designed for the inside of pipes, holes and small parts.
Key features
-
13 standard probes for one instrument
-
Dual Fe/NFe probe automatically recognises the substrate
-
Thick-coating probes up to 20 mm (Fe S) and 12.5 mm (two-pole)
-
Micro probes 0°, 45°, 90° – 0–500 µm
-
90° probes for hard-to-reach areas (inner pipe walls) Models / variants (order no. – probe – range):
-
2442.410 Dual Fe/NFe 0° – 0–3,000 µm Fe / 0–1,250 µm NFe
-
2442.100 Fe 0° – 0–5,000 µm; 2442.110 Fe 90° – 0–5,000 µm
-
2442.120 Fe S 0° – 0.5–20 mm; 2442.200 two-pole Fe – 0.5–12.5 mm
-
2442.130 NFe 0° – 0–1,000 µm; 2442.140 NFe S 0° – 0–3,750 µm
-
2442.300/.320/.340 micro Fe 0°/45°/90° – 0–500 µm
-
2442.310/.330/.350 micro NFe 0°/45°/90° – 0–500 µm
Technical data
- Methods: magnetic induction (Fe), eddy current (NFe)
- Max. coating thickness: up to 20 mm
- Compatibility: LEPTOSKOP 2042
Standards
DIN EN ISO 2178, DIN EN ISO 2360
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: karldeutsch.de
You might also be interested in
Karl Deutsch Pocket-LEPTOSKOP – pocket coating thickness gauge
One of the smallest electronic coating thickness gauges with an integrated spring-loaded probe, designed for quick one-handed checks.
Helmut Fischer DUALSCOPE FMP100 and H FMP150 – gauges with inspection plans
Handheld gauges for complex and regulated measuring tasks in production quality control.
Helmut Fischer PHASCOPE PMP10 – metallic coating thickness gauge for special tasks
A classic handheld gauge for quality control of electroplated and metallic coatings where conventional methods do not work: rough surfaces, small and curved parts, conductive coatings on conductive substrates.
Helmut Fischer PHASCOPE PMP10 DUPLEX – duplex coating thickness gauge
A specialised gauge for duplex systems – paint on galvanised steel – from car bodies to roofing and façade sheet.
Helmut Fischer SR-SCOPE DMP30 – copper thickness gauge for PCBs
A handheld instrument for electronics manufacturers for measuring the thickness of thin copper layers on multilayer PCBs and laminates without influence from deeper, insulated copper layers.
Helmut Fischer FISCHERSCOPE MMS PC2 – modular benchtop measuring system
A universal benchtop system for laboratories and production quality control: coating thickness, electrical conductivity and ferrite content are measured in parallel with one instrument.
Helmut Fischer BETASCOPE – beta backscatter module for the thinnest coatings
An expansion module for the FISCHERSCOPE MMS PC2 that measures organic and metallic coatings when the atomic numbers of the coating and the substrate differ sufficiently.
Karl Deutsch LEPTOSKOP 2042 – universal coating thickness gauge with interchangeable probes
Industrial handheld gauge that, depending on the probe, measures non-magnetic coatings on steel (magnetic induction) and non-conductive coatings on non-ferrous metals (eddy current).
Helmut Fischer MP0 / MP0R series – compact coating thickness gauges for corrosion protection
Compact series of handheld gauges for measuring the thickness of paint, hot-dip galvanised and plastic coatings on site on most metals.
Helmut Fischer DMP10-40 series – universal coating thickness gauges with interchangeable probes
A universal series of handheld gauges for quality assurance in production and in the laboratory – non-destructive coating thickness measurement on ferrous and non-ferrous metals with a very wide range of probes.