Helmut Fischer MP0 / MP0R series – compact coating thickness gauges for corrosion protection
Applications
Compact series of handheld gauges for measuring the thickness of paint, hot-dip galvanised and plastic coatings on site on most metals. The instrument automatically selects the method according to the substrate; the low-wear probe pole is designed for thousands of measurements. Suitable for painting and galvanising companies, shipbuilding and steel structure fabrication.
Key features
- Two illuminated displays – the second on top for overhead measurement (MP0R – auto-rotating)
- Magnetic induction and amplitude-sensitive eddy current methods
- Accurate conductivity compensation
- MP0R: memory for 10,000 readings, USB, preset IMO PSPC and SSPC-PA2 modes
- Integrated or cable probe (FP, FPW angled)
- Limit value monitoring with light signal
Models
MP0 (basic, 1,000 readings, no USB) – DUALSCOPE, PERMASCOPE; MP0-FP with cable probe; MP0R (comfort, 10,000 readings, USB) – DUALSCOPE, ISOSCOPE, PERMASCOPE; MP0R-FP, MP0R-FPW (angled cable probe)
Technical data
- Method: magnetic induction and amplitude-sensitive eddy current
- Range: DUALSCOPE 0–2,000 µm; ISOSCOPE 0–1,200 µm; PERMASCOPE 0–2,500 µm
- Memory: 1,000 (MP0) / 10,000 (MP0R) readings
- Data transfer: USB (MP0R only)
- Probe: integrated or permanently connected cable probe
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: helmut-fischer.com
You might also be interested in
Karl Deutsch LEPTOSKOP 2042 – universal coating thickness gauge with interchangeable probes
Industrial handheld gauge that, depending on the probe, measures non-magnetic coatings on steel (magnetic induction) and non-conductive coatings on non-ferrous metals (eddy current).
Helmut Fischer DMP10-40 series – universal coating thickness gauges with interchangeable probes
A universal series of handheld gauges for quality assurance in production and in the laboratory – non-destructive coating thickness measurement on ferrous and non-ferrous metals with a very wide range of probes.
Karl Deutsch LEPTO-Pen 2091 – mechanical coating thickness gauge for steel
A simple and economical instrument for quickly checking the thickness of non-magnetic coatings on unhardened commercial steel when the accuracy of an electronic gauge is not needed.
Karl Deutsch LEPTOSKOP probes – interchangeable Fe/NFe probes up to 20 mm
A range of probes for the LEPTOSKOP 2042 gauge that allows a single instrument to measure coatings from a few microns up to 20 mm thick on steel and non-ferrous metals.
Karl Deutsch Pocket-LEPTOSKOP – pocket coating thickness gauge
One of the smallest electronic coating thickness gauges with an integrated spring-loaded probe, designed for quick one-handed checks.
Helmut Fischer DUALSCOPE FMP100 and H FMP150 – gauges with inspection plans
Handheld gauges for complex and regulated measuring tasks in production quality control.
Helmut Fischer PHASCOPE PMP10 – metallic coating thickness gauge for special tasks
A classic handheld gauge for quality control of electroplated and metallic coatings where conventional methods do not work: rough surfaces, small and curved parts, conductive coatings on conductive substrates.
Helmut Fischer PHASCOPE PMP10 DUPLEX – duplex coating thickness gauge
A specialised gauge for duplex systems – paint on galvanised steel – from car bodies to roofing and façade sheet.
Helmut Fischer SR-SCOPE DMP30 – copper thickness gauge for PCBs
A handheld instrument for electronics manufacturers for measuring the thickness of thin copper layers on multilayer PCBs and laminates without influence from deeper, insulated copper layers.
Helmut Fischer FISCHERSCOPE MMS PC2 – modular benchtop measuring system
A universal benchtop system for laboratories and production quality control: coating thickness, electrical conductivity and ferrite content are measured in parallel with one instrument.