SIUI calibration blocks for ultrasonic testing
Applications
Calibration and verification of ultrasonic and PAUT instruments and probes – time base, beam angle, index point, sensitivity, resolution and DAC/TCG curves in the laboratory and on site.
Key features
- Blocks to ISO, ASTM, AWS, ASME, API and BS standards
- For both conventional UT and PAUT (Type A/B, PAUT IIW)
- Compact blocks for on-site use (V2, V3)
- ASME blocks for pipe made from customer-supplied pipe
Blocks
- 4/5-step block – ASTM E797 (thickness, linearity)
- V1 – ISO 2400 (also BS 2704, ASTM E164, AWS D1.1, AS 2083)
- V2 – ISO 7963 (also BS 2704)
- V3 – compact alternative to V1 / IIW blocks
- PA Type A and Type B – ASTM E2491
- PAUT IIW – ISO 19675
- ROMPAS, DSC, DC, SC – ASTM E164 (DC and SC also AWS D1.1)
- DS and RC – AWS D1.1
- IOW – API RP 2X (also BS 2704, AS 2083)
- ASME basic calibration blocks, and for pipe from customer-supplied pipe – ASME BPVC-V
- ASTM area/amplitude (set of 8), distance/area amplitude (set of 10), distance amplitude (set of 19) – ASTM E127 / E428
- GS series (set of 7) for pipe welds OD 20–500 mm – NB/T 47013.3
Standards
ISO 2400, ISO 7963, ISO 19675, ASTM E797, ASTM E164, ASTM E2491, ASTM E127, ASTM E428, AWS D1.1, ASME BPVC-V, API RP 2X, BS 2704, AS 2083
What we offer
- Selection of the instrument, probes and calibration blocks for your task
- Advice on configuration and optional functions
- Service and calibration organised for you
Technical data according to the manufacturer: siui.com
You might also be interested in
SIUI wedges, cables and accessories for ultrasonic probes
PA and TOFD wedges (high-temperature, curved, irrigated), probe cables with BNC, LEMO, Microdot, UHF connectors, probe test reports, storage boxes.
SIUI UT probes – ultrasonic transducers for flaw detection and thickness gauging
Normal, angle, dual-element, delay line, high-temperature, immersion and other ultrasonic probes; custom probes also available.
SIUI CTS-30C – thru-coating thickness gauge
Compact ultrasonic thickness gauge that measures metal thickness through paint or coating, especially on thin-wall pipes.
SIUI CTS-30A / CTS-30B – ultrasonic thickness gauges
Pocket-size 140 g thickness gauges for metals and many other materials; over 30 h operation, up to 5,000 readings in memory.
SIUI CTS-9D – ultrasonic flaw detector with touchscreen
Flaw detector controlled by keys, touchscreen and voice; 640 MHz / 12-bit sampling for detecting small flaws.
SIUI Smartor – ultrasonic flaw detector and thickness gauge
Compact 0.9 kg flaw detector for weld, plate and forging inspection; the same instrument also measures wall thickness.
NOVOTEST UT-1M – ultrasonic thickness gauge
For one-sided wall thickness inspection of pipelines, tanks and structures; Echo-Echo mode allows measurement through paint coatings without removing them.
NOVOTEST UT-1M-IP – thickness gauge in an IP65 housing
For field and shipbuilding inspections where the instrument is used in rain, dust or humid environments.
NOVOTEST UT-1M-ST – thickness gauge in a reinforced housing
For production shops and installation sites where the instrument may be dropped or crushed.
NOVOTEST UT-2A – thickness gauge with A-Scan
For NDT specialists who need to see the signal (A-Scan) and control the gates when measuring corroded, multilayer or complex objects.