Aberlink Extol – shop-floor CNC coordinate measuring machine
Applications
For quality inspection of critical parts next to machine tools, in production cells or inspection areas – the Extol is designed for reliable 24/7 operation. Five temperature sensors monitor machine and ambient conditions; the software compensates the measurements as if they had been taken at 20 °C and gives a warning if the temperature changes too quickly.
Key features
- Fully sealed recirculating crossed roller bearings – resistant to dirt
- Swiss DC motors and Deva motion control
- Smooth belt drives and precise linear bearings – long probes can be used
- Automatic tool offset correction and integration into automated cells
- Aberlink software – can be learned in one day
- Smallest footprint among shop-floor CMMs of similar size
- Industrial joystick as standard
Technical data
| Parameter | Extol 370 | Extol 520 |
|---|---|---|
| Axis travel | XY Ø 370 / Z 270 mm | XY Ø 520 / Z 300 mm |
| Overall dimensions (X / Y / Z) | 730 / 715 / 2000 mm | 990 / 950 / 2200 mm |
| Control / design | CNC / delta | CNC / delta |
| Drive | belt drive with linear bearings | belt drive with linear bearings |
| Volumetric accuracy | TP20: 2.6 + L/250 µm; TP200: 2.5 + L/250 µm; SP25M: 2.3 + L/250 µm | as Extol 370 |
| Scale resolution | 0.1 µm | 0.1 µm |
| Optimum / operating temperature | 18–22 °C / 5–45 °C | 18–22 °C / 5–45 °C |
| Table / load | granite / 200 kg | granite / 200 kg |
| Max. speed / acceleration | 500 mm/s / 750 mm/s² | 500 mm/s / 750 mm/s² |
| Compressed air | not required | not required |
The machine should not be installed where the temperature changes quickly: the ambient temperature must change by no more than 1 °C/h. L – measured length, mm.
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your parts in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: trimos.com
You might also be interested in
Aberlink Axiom – bridge-type coordinate measuring machine
Bridge-type coordinate measuring machine for small and medium-sized parts – manual or CNC, with easy-to-use Aberlink software.
Aberlink Halo – belt-driven CNC bridge coordinate measuring machine
Competitively priced CNC bridge CMM for medium-sized parts – for the quality lab and the production area.
Aberlink Measur3D – portable manual coordinate measuring machine for the shop floor
A compact manual CMM with three rotary axes – the part is measured straight after it comes off the machine tool.
Aberlink Azimuth – large bridge-type coordinate measuring machine
The largest Aberlink CMM for large and heavy components – Y travel up to 3000 mm.
Aberlink Horizon – bridge CMM with linear motors
Aberlink’s most accurate bridge CMM: linear motors thermally isolated from the metrology frame.
Aberlink 3D – measuring software for CMMs and Trimos 3D instruments
Simple 2D and 3D measuring software – for occasional users and inspection professionals alike.
Trimos C4 – portable CNC coordinate measuring machine
A 13.5 kg 4-axis CNC coordinate measuring machine that can be carried to the part on the shop floor.