Karl Deutsch DEUTROMETER 3873 – magnetic field strength and UV light meter
Applications
For checking the tangential field strength during magnetisation and the residual field after demagnetisation according to EN ISO 9934-3 and EN ISO 17638; the UNIVERSAL and LIGHT versions additionally measure UV irradiance and white-light illuminance according to EN ISO 3059 – required to verify the conditions for fluorescent MT and PT inspection.
Key features
- Automatic DC / AC field type recognition, four operating modes, limit value monitoring
- Units mT, A/cm, kA/m, Gauss; UV W/m² or µW/cm²; white light lx
- Backlit display and UV-fluorescent labels for work in a dark booth
- Straight, 90° angled and transverse field probes; paraffin-resistant version for oily media
- Checking with a reference magnet and a zero-field chamber
Models
3873.001 DEUTROMETER (field); 3873.002 DEUTROMETER LIGHT; 3873.003 DEUTROMETER UNIVERSAL; probes: 3873.101 (90°), 3873.201 (straight), 3873.301 (90°, for transverse field)
Technical data
- Measured quantities: H or B (in air), DC and AC fields; UV irradiance Ee; white-light illuminance Ev (with DEUTROLIGHT sensor)
- Frequency range: 20–500 Hz
Standards
EN ISO 9934-3:2002 (section 9.3); EN ISO 17638 (section 5.5.2); DIN EN ISO 3059:2012
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: karldeutsch.de, karldeutsch.de
You might also be interested in
Karl Deutsch DEUTROPULS hand yokes – mobile magnetic particle testing
For mobile magnetic particle testing of ferromagnetic parts and welds in the workshop, on construction sites or during assembly, including under harsh conditions.
Karl Deutsch DEUTROPULS SW – portable high-current generators for MT
For mobile MT inspection of large structures, castings and forgings using the current flow method when a yoke is not sufficient.
Karl Deutsch FLUXA – magnetic particle testing media
For all MT tasks – from series fluorescent inspection on stationary DEUTROFLUX lines to single-part black-and-white inspection in the field where darkening is not possible.
Karl Deutsch reference magnet and zero-field chamber – DEUTROMETER accessories
For periodic checking and zeroing of the DEUTROMETER and its probes in line with quality system requirements.
Karl Deutsch ESV / MSV demagnetising coils
For demagnetising parts outside DEUTROFLUX benches – after magnetic particle testing, before machining or assembly. With a conveyor or inclined chute – for an automated continuous process.
Karl Deutsch UV-LED large-area lamp 3846 – stationary UV lamp for MT and PT
For stationary use in MT and PT inspection booths and lines.
Karl Deutsch UV-LED hand lamp 3817.101 – portable UV lamp for MT and PT (new)
For mobile fluorescent MT and PT inspection on the shop floor and in the field – with two battery packs and a case.