Home / Flaw Detection (NDT) / Magnetic Particle Testing (MT) / Karl Deutsch FLUXA – magnetic particle testing media

Karl Deutsch FLUXA – magnetic particle testing media

Applications

For all MT tasks – from series fluorescent inspection on stationary DEUTROFLUX lines to single-part black-and-white inspection in the field where darkening is not possible. Water-based concentrates are diluted 1:20–1:200, oil-based ones are for high flash point.

Key features

  • Fluorescent media – high contrast for the finest defects

  • Water-based HRS family without VOC, ready-to-use aerosols on site

  • Special versions for oily surfaces (HRS/SPECIAL) and highly concentrated ones (HKS/SPECIAL 1:100–1:200)

  • Red TRS – also for daylight

  • Oil-based HS-O (flash point > 65 °C) and HS-O-110 (> 100 °C)

  • Black-and-white system: BLACK-O, BLACK-W, BLACK powder, white background Models / variants (manufacturer item numbers):

  • Fluorescent, water-based: CONCENTRATE HRS 9306.1/9306.2 (1:20–1:40); SPRAY HRS AEROSOL 9306.9; HRS/G 9356.1/9356.2; HRS/SPECIAL 9306.122/9306.22; HVP 9357.1/9357.2 (1:40–1:80); HKS/SPECIAL 9366.12 (1:100–1:200); TRS 9706.1/9706.2 (red); FGR/G 9256.1; FLUXA 140 G 9261.1/9261.2

  • Fluorescent, oil-based: CONCENTRATE HS-O 9314.1; HS-O ready-to-use 9314.9 (aerosol) / 9314.2 / 9314.25; HS-O-110 9315.2/9315.25

  • Non-fluorescent: BLACK-O ready-to-use 9014.2/9014.25; BLACK-O AEROSOL 9014.9; SUSPENSION BLACK-AMS 9014.6/9014.625; CONCENTRATE BLACK-W 9016.1; POWDER BLACK 9010.1 (5 kg); BACKGROUND PAINT WHITE 9015.1/9015.5/9015.2; UG-W 9015.100

  • Accessories: ASTM sedimentation glass 6901.001, stand 9804.002, spray bottle 1 l 6303.001

Technical data

dilution ratios and packaging according to the list above; flash point HS-O > 65 °C, HS-O-110 > 100 °C

Standards

DIN EN ISO 9934-2 (all fluorescent); the manufacturer states compliance with DIN EN ISO, AMS, ASTM, BS

What we offer

  • Selection of the instrument and configuration for your task, together with the manufacturer
  • Trial measurements of your samples in the manufacturer’s laboratory
  • Training, calibration and service organised through the manufacturer

Request a quote

Technical data according to the manufacturer: karldeutsch.de, karldeutsch.de

You might also be interested in

Karl Deutsch UV-LED hand lamp 3817.101 – portable UV lamp for MT and PT (new)

For mobile fluorescent MT and PT inspection on the shop floor and in the field – with two battery packs and a case.

Karl Deutsch DEUTROPULS hand yokes – mobile magnetic particle testing

For mobile magnetic particle testing of ferromagnetic parts and welds in the workshop, on construction sites or during assembly, including under harsh conditions.

Karl Deutsch DEUTROPULS SW – portable high-current generators for MT

For mobile MT inspection of large structures, castings and forgings using the current flow method when a yoke is not sufficient.

Karl Deutsch DEUTROMETER 3873 – magnetic field strength and UV light meter

For checking the tangential field strength during magnetisation and the residual field after demagnetisation according to EN ISO 9934-3 and EN ISO 17638; the UNIVERSAL and LIGHT versions additionally measure UV irradiance and white-light illuminance according to EN ISO 3059 – required to verify the conditions for fluorescent MT and PT inspection.

Karl Deutsch reference magnet and zero-field chamber – DEUTROMETER accessories

For periodic checking and zeroing of the DEUTROMETER and its probes in line with quality system requirements.

Karl Deutsch ESV / MSV demagnetising coils

For demagnetising parts outside DEUTROFLUX benches – after magnetic particle testing, before machining or assembly. With a conveyor or inclined chute – for an automated continuous process.

Karl Deutsch UV-LED large-area lamp 3846 – stationary UV lamp for MT and PT

For stationary use in MT and PT inspection booths and lines.