Karl Deutsch ECHOMETER 1076 K – liquid concentration meter
Applications
For determining the concentration of binary solutions (acids, salts, alcohols, glycols) from the sound velocity. The probe is immersed in the liquid; when the relationship between concentration and sound velocity is known, the calibrated concentration is read directly. Suitable for process control in chemical, food and electroplating applications.
Key features
- Cuvette-shaped immersion probe with a fixed measuring path
- Piezo elements with a protective layer against chemically aggressive liquids
- Sound velocity displayed directly, concentration according to calibration
- RS232 interface for outputting results
- Sturdy case
Models
1076.912 (data package)
Technical data
- Measured quantity: sound velocity in the liquid (m/s)
- Interface: RS232
- Example values (from the manufacturer’s table): distilled water 1497 m/s (25 °C), ethanol 1207 m/s (25 °C), glycerine 1923 m/s (20 °C), 25 % NaCl 1770 m/s (25 °C)
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: karldeutsch.de, karldeutsch.de
You might also be interested in
Karl Deutsch ECHOMETER 1076 Basic – ultrasonic wall thickness gauge
Basic ultrasonic thickness gauge for shop-floor quality control and for inspecting tanks and pipelines that may be corroded from the inside.
Karl Deutsch ECHOGRAPH 1095 – handheld ultrasonic flaw detector
For manual ultrasonic testing of welds, castings, forgings and rolled products on the shop floor and in the field.
NOVOTEST UT-1M – ultrasonic thickness gauge
For one-sided wall thickness inspection of pipelines, tanks and structures; Echo-Echo mode allows measurement through paint coatings without removing them.
NOVOTEST UT-1M-IP – thickness gauge in an IP65 housing
For field and shipbuilding inspections where the instrument is used in rain, dust or humid environments.
NOVOTEST UT-1M-ST – thickness gauge in a reinforced housing
For production shops and installation sites where the instrument may be dropped or crushed.
NOVOTEST UT-2A – thickness gauge with A-Scan
For NDT specialists who need to see the signal (A-Scan) and control the gates when measuring corroded, multilayer or complex objects.
NOVOTEST UT-3M-EMA – EMAT thickness gauge without couplant
For inspecting pipelines, tanks and boilers where the surface is coated, dirty or hot and couplant cannot be used.
Karl Deutsch ECHOMETER 1076 Data – thickness gauge with data memory
The same measuring basis as the 1076 Basic, extended with data logging and statistics – for inspections where measurement results need to be documented and transferred to a computer.
Karl Deutsch ECHOMETER 1076 TC Data – thickness measurement through coating
The top model of the 1076 family – all 1076 Data functions plus measurement through coating.
Karl Deutsch ECHOMETER 1077 Data – high-accuracy A-scan thickness gauge
For precision tube production, car body stampings and laboratories that need uncertainty at the 0.01 mm level and an A-scan display.