NOVOTEST UT-1M-ST – thickness gauge in a reinforced housing
Applications
For production shops and installation sites where the instrument may be dropped or crushed.
Key features
- Full range of probes 1.25–10 MHz
- B-Scan, Control, Echo-Echo
- 2 × AA, ≥25 h
Models
UT-1M-ST
Technical data
- Measuring range: 0.4–1500 mm depending on probe
- Resolution: 0.01 mm; accuracy ±(0.01T + 0.05) mm
- Velocity range: 1000–17000 m/s
- Power supply: 2 × AA, ≥25 h
Standards
ASTM E797, EN 14127, EN 15317
What we offer
- Selection of the instrument and configuration for your task, together with the manufacturer
- Trial measurements of your samples in the manufacturer’s laboratory
- Training, calibration and service organised through the manufacturer
Technical data according to the manufacturer: novotest.biz
You might also be interested in
NOVOTEST UT-2A – thickness gauge with A-Scan
For NDT specialists who need to see the signal (A-Scan) and control the gates when measuring corroded, multilayer or complex objects.
NOVOTEST UT-3M-EMA – EMAT thickness gauge without couplant
For inspecting pipelines, tanks and boilers where the surface is coated, dirty or hot and couplant cannot be used.
Karl Deutsch ECHOMETER 1076 Data – thickness gauge with data memory
The same measuring basis as the 1076 Basic, extended with data logging and statistics – for inspections where measurement results need to be documented and transferred to a computer.
Karl Deutsch ECHOMETER 1076 TC Data – thickness measurement through coating
The top model of the 1076 family – all 1076 Data functions plus measurement through coating.
Karl Deutsch ECHOMETER 1077 Data – high-accuracy A-scan thickness gauge
For precision tube production, car body stampings and laboratories that need uncertainty at the 0.01 mm level and an A-scan display.
Karl Deutsch ECHOMETER 1076 K – liquid concentration meter
For determining the concentration of binary solutions (acids, salts, alcohols, glycols) from the sound velocity.
Karl Deutsch ECHOMETER 1076 Basic – ultrasonic wall thickness gauge
Basic ultrasonic thickness gauge for shop-floor quality control and for inspecting tanks and pipelines that may be corroded from the inside.
Karl Deutsch ECHOGRAPH 1095 – handheld ultrasonic flaw detector
For manual ultrasonic testing of welds, castings, forgings and rolled products on the shop floor and in the field.
NOVOTEST UT-1M – ultrasonic thickness gauge
For one-sided wall thickness inspection of pipelines, tanks and structures; Echo-Echo mode allows measurement through paint coatings without removing them.
NOVOTEST UT-1M-IP – thickness gauge in an IP65 housing
For field and shipbuilding inspections where the instrument is used in rain, dust or humid environments.