Kietumo matavimai

NOVOTEST Shore Durometer TS-A

The Shore Durometer is one of the modern non-destructive testing instruments for measuring of the hardness value of different materials at the workshops and laboratories. This device can be used at the radio instruments industry, mechanical engineering and other areas of modern industry.

Shore Durometer NOVOTEST TS-A complies to: ISO-7619 and ISO-868, DIN53505, ASTM D2240 and JIS K7215.

Soft plastic, printed circuit boards, glass, elastomers, fibers, soft rubber, leather, resin, wax, neoprin, butyl, silicone, vinyl are typical testing materials for Shore Durometer. The principle of determining the hardness value of materials is based on the calculation the value of material’s resistance to the penetration of the indenter with a preset load.

 

Advantages

Shore Durometer NOVOTEST TS-A has two versions, A and D.

Shore Durometer A is designed for testing the following materials: soft rubber, elastomers, silicone, neoprin, vinyl, butyl, nitrile, soft plastics, leather, wax, etc.

Shore Durometer D is designed for testing products from rubber, resin, glass, PCB, fibers, plastics, etc.

 

Specifications

Measurement range, Shore scale from 0 to 100
Interval of scale indicator, Shore scale 1,0
Measurement accuracy ± 1,0 scale division
Dimensions, mm 115*60*25
Weight, kg, no more 0,5

 

Available options

Two versions of Shore Durometer NOVOTEST TS-A are available: A (for soft rubber, silicone, soft plastics, leather etc.) and D (for glass, PCB, plastics etc.).

Shore Durometer also can be equipped with Shore Hardness Test Stand NOVOTEST (tripod). Using Shore Durometer NOVOTEST TS-A with a stand allows user to provide more accurate results of testing, and also increases the repeatability of the results. In the most cases Shore Durometer with stand is the optimum choice, because the operator error are much decreased, that gives more accurate results.

Also, we produce Shore Hardness Test Blocks for checking the measurement accuracy of the device.

 

Standart package

  • Shore durometer
  • Operating manual
  • Case

Panašūs produktai

AXIOTEK HARDNESS TESTER 500 M RSD

The hardness tester 500 M RSD performs Rockwell, superficial Rockwell tests and generates…

Išsamiau

AXIOTEK HARDNESS TESTER AX-PD

Recommended for medium-sized and irregularly shaped sample, AX/PD is the new digital…

Išsamiau

AXIOTEK HARDNESS TESTER AX-5

Thanks to the single-axis motorized support base, the AX-5 is ideal for performing…

Išsamiau

AXIOTEK HARDNESS TESTER AX 3000

AX 3000 has been designed to perform Case Hardness Depth (CHD) measurements…

Išsamiau

AXIOTEK HARDNESS TESTER AX-B

The hardness tester AX-B performs Rockwell tests and generates Brinell and Vickers indentations.…

Išsamiau

AXIOTEK HARDNESS TESTER Analog Shore

To measure the hardness of plastics and rubbers according to…

Išsamiau

NOVOTEST Shore Durometer TS-C

The Shore Durometer is one of the modern non-destructive testing…

Išsamiau

NOVOTEST Shore Hardness Test Blocks HA, HD

Standard Set Of Shore Test Blocks is designed to verify…

Išsamiau

NOVOTEST Shore Hardness Test Stand

NOVOTEST Shore Hardness Testing Stand is the accessory unit for…

Išsamiau

NOVOTEST Vickers Hardness Test Blocks HV

Hardness testing blocks are designed for metals hardness testers calibration. There are…

Išsamiau